Horizontal Carbonization Furnace Delivery to the Philippines

Why the Philippines Needs Advanced Carbonization Technology​

The Philippines, with its abundant biomass resources (Kerang kelapa, wood waste, dan sisa pertanian), has seen a growing demand for efficient ​mesin membuat arang. Traditional ​tanur arang​ are often inefficient, time-consuming, and environmentally unfriendly. That’s where ​Weiwa Machinery’s horizontal carbonization furnace​ comes in—a modern solution designed for ​high-yield, low-emission charcoal production.

Recently, we successfully shipped one of our ​horizontal carbonization furnaces to the Philippines, marking a significant step in expanding our presence in Southeast Asia.

From Factory to the Philippine Client’s Site​

Pre-Shipment Preparations & Penyesuaian​

Before the ​relau pengkarbonan mendatar​ left our factory, we worked closely with the Philippine client to ensure the machine met their specific requirements. Key considerations included:

• ​Capacity needs​ (based on their raw material volume—mostly coconut shells and wood chips)
• ​Fuel efficiency​ (optimized for minimal gas consumption)
• ​Safety features​ (automatic temperature control and emergency shutdown systems)

The furnace was carefully packaged to withstand long-distance shipping, ensuring no damage during transit.

Arrival & On-Site Setup in the Philippines​

Upon arrival, our local partners assisted in unloading and positioning the ​relau pengkarbonan mendatar. Our technicians provided ​on-site training​ to the client’s team, covering:

• ​Machine assembly & initial ignition​
• ​Optimal carbonization temperature settings​ (usually between 400°C–600°C for best results)
• ​Safety protocols​ (handling high temperatures and gas emissions)

The setup process was smooth, thanks to our pre-installation guidance and the client’s proactive cooperation.

How Weiwa’s Relau karbonisasi mendatar Works?​

Tidak seperti tradisionaltanur arang, which rely on slow pyrolysis in sealed pits, our ​relau pengkarbonan mendatar​ uses a ​continuous carbonization process, ensuring:

• ​Faster production cycles​ (reducing downtime)
• ​Higher charcoal yield​ (up to 30–40% more than conventional methods)
• ​Lower environmental impact​ (with a built-in gas recycling system to reduce smoke)

Key Features Benefiting Philippine Clients​

1. ​Continuous Feeding System​ – Allows uninterrupted operation, ideal for high-demand charcoal production.
2. ​Gas Reuse Technology​ – The furnace recycles combustible gases, reducing fuel costs and emissions.
3. ​Pembinaan tahan lama​ – Made with high-temperature-resistant steel, ensuring longevity even in humid Philippine conditions.

Trial Run Results of the Horizontal Carbonization Furnace​

After installation, we conducted a ​live trial run​ using locally sourced ​coconut shells and wood. The results were impressive:

High Carbonization Efficiency​

• ​Raw Material Input:​​ 1 ton of coconut shells
• ​Charcoal Output:​​ ~350–400 kg of high-quality charcoal
• ​Carbonization Time:​​ ~4–6 hours (faster than traditional kilns)

Reduced Emissions & Fuel Savings​

Thanks to the ​gas recycling system, the furnace required minimal external fuel after the initial ignition phase. The client reported:

• ​Sehingga 40% less firewood/gas consumption​ compared to their old charcoal kiln.
• ​Significantly reduced smoke emissions, making it more environmentally compliant.

The Philippine client was highly satisfied, confirming that our ​relau pengkarbonan mendatar​ is a ​superior alternative to traditional charcoal-making methods.

Why Filipino Clients Trust Weiwa Machinery?​

kamirelau pengkarbonan mendatar​ is gaining traction in the Philippines because:
​Proven Performance​ – Tested in multiple countries with similar biomass conditions.
​Kos efektif​ – Lower operational costs due to energy recycling.
​Expert Support​ – From installation to training, we provide end-to-end service.

The success of this shipment reinforces our commitment to helping ​Filipino entrepreneurs​ produce ​high-quality charcoal efficiently and sustainably.

A Step Forward for Sustainable Charcoal Production in the Philippines​

The delivery and successful trial of Weiwa’s ​relau pengkarbonan mendatar​ in the Philippines highlight how ​modern carbonization technology​ can transform traditional charcoal-making. denganhigher yields, lower emissions, and faster production, our machines are designed to meet the needs of both small-scale and industrial charcoal producers.

For Filipino clients looking for a ​boleh dipercayai, cekap, and eco-friendly charcoal kiln, Weiwa Machinery remains the top choice.

​Mengenai Jentera Weiwa​

PadaJentera Weiwa, kami pakar dalambiomass carbonization solutions, termasukrelau pengkarbonan mendatar, mesin membuat arang, dan tanur mesra alam. With years of experience in exporting to Southeast Asia, Afrika, and beyond, kami sediakan:
✔Penyelesaian tersuaiuntuk bahan mentah yang berbeza
✔Professional installation & latihan​
✔Ongoing technical support​

Whether you’re in the ​Filipina, Indonesia, or anywhere else, we’re here to help you upgrade your charcoal production with cutting-edge technology.

​Contact us today to learn more about our horizontal carbonization furnace and how it can benefit your business!